Wholesale Sodium Meters Manufacturer & Manufacturers

While cation conductivity is widely utilized to observe total anionic mineral loads, it lacks specificity and sensitivity during initial resin exhaustion. Sodium (Na⁺) represents the weakest bound cation on ion-exchange resins and invariably slips into condensate streams hours before conductivity detects measurable changes. By monitoring trace sodium down to 0.01 ppb, operators identify demineralizer exhaustion early, preventing caustic turbine cracking.

Sodium-selective glass electrodes are chemically sensitive to hydronium ions (H⁺) due to their higher mobility in glass gel layers. If sample pH is near neutral or acidic, H⁺ ions saturate electrode active sites, registering false high sodium readings. By bubbling volatile alkaline reagents such as Diisopropylamine (DIPA) or concentrated Ammonia gas into the sample stream, pH rises to 10.5–11.5, suppressing free H⁺ ions and enabling unhindered, accurate pNa measurement down to 0.1 ppb.

Standard catalog configurations typically ship within 5 to 7 business days following QA aging and two-point factory calibration. For custom OEM/ODM production involving custom private-label silk-screen branding, bespoke enclosure dimensions, custom Modbus register addresses, and multi-parameter cabinet integration, typical manufacturing turnaround ranges from 2 to 4 weeks depending on batch volume.

Yes. Our analyzers are designed for seamless integration. Standard panel-mount or wall-mount dimensions fit conventional 19-inch racks or cutout plates. Process connections use universal 1/4-inch or 6mm compression fittings, and dual 4-20mA outputs and RS485 Modbus RTU communication ensure seamless hookup to DCS platforms (Emerson Ovation, ABB Symphony, Siemens SPPA-T3000, and Honeywell Experion).

High-temperature steam or boiler feedwater cannot be directly channeled into the measuring block. Samples must pass through primary and secondary sample coolers within the Steam and Water Analysis System (SWAS) to stabilize sample temperature to 25℃ ± 2℃ and reduce pressure to 0.05 – 0.2 MPa with a consistent volumetric flow of 5 to 15 L/h. BOQU provides integrated sample conditioning modules when required.