Featured Submersible & High-Temperature Instrumentation
Precision-engineered pH and analytical probes built for continuous long-term submersion and chemical resistance.
Wholesale High-temperature S8 Connector pH Sensor Manufacturers, Factory
View Specifications
China High-temperature pH Sensor Used Pharmaceutical Fermentation Wholesaler, Supplier
View Specifications
China High Temperature (0-130℃) pH Sensor With Temperature Wholesaler, Suppliers
View Specifications
Wholesale High Temperature (0-130℃) pH Sensor Supplier, Factories
View Specifications
pH5806 Steam Sterilizable Submersible pH Sensor
View Specifications
IOT-485-pH Digital Direct Modbus Submersible Sensor
View Specifications
DOG-208FA High Temperature Dissolved Oxygen Sensor
View Specifications
ZDYG-2088-01QX Immersion Optical Turbidity Sensor
View SpecificationsIndustrial-Grade Architecture for Extreme Immersion
Addressing the core challenges of submersible pH sensing: zero zero-drift, junction clogging prevention, and hydro-static pressure barrier integrity.
Polymerized Solid Gel Electrolyte
Utilizes ultra-pure polymerized cross-linked acrylamide gel pre-pressurized to 6 bar. Completely eliminates electrolyte depletion and reverse diffusion when submerged up to 30 meters.
Dual Annular PTFE Junction
Replaces fragile ceramic frits with porous hydrophobic Polytetrafluoroethylene (PTFE). Resists organic fouling, oil adhesion, and heavy suspended solids in aeration tanks.
Heavy-Wall Low-Impedance Glass
Hand-blown alkali-resistant membrane glass with nominal impedance under 150 MΩ. Provides lightning-fast response times below 10 seconds while withstanding mechanical abrasion.
Integrated Edge-Computing Transceiver
Equipped with internal RS485 Modbus-RTU microcircuits and PT1000 temperature compensation. Outputs raw and temperature-corrected pH values directly to PLC/SCADA without preamps.
Global Macro Industry Solutions & Commercial Landscape
Empowering multinational industries to achieve water stewardship, zero-liquid discharge (ZLD), and regulatory compliance.
Industrial Wastewater & Heavy Metals
Submersible pH probes act as the primary feedback loop in automated caustic/acid dosing systems. Accurate pH management enables optimal precipitation of toxic heavy metal hydroxides (Cr, Cu, Ni, Zn) prior to municipal sewer discharge.
Biopharma & Sterile Fermentation
Our pressurized glass electrodes withstand continuous steam-in-place (SIP) up to 130°C. They maintain hyper-accurate ±0.02 pH resolution over 100+ sterilization cycles, safeguarding protein expression and metabolic yield.
Power Generation & SWAS Systems
Boiler feed water demands strict alkalinization with ammonia or volatile amines to prevent stress corrosion cracking in steam turbines. Submersible and flow-through cells ensure continuous monitoring of ultra-pure low-conductivity water down to 0.055 µS/cm.
Verified Manufacturing & Global Delivery Capacity
End-to-end sensor production and rigorous aging protocols out of Pudong and Lingang industrial hubs.
Technical Selection Matrix: Matching Chemistry to Probe Construction
A reference architecture designed by senior electrochemical engineers to avoid premature electrode failure.
| Submersible Model Series | Reference System & Junction | Temperature & Pressure Threshold | Cable Immersion Armor | Recommended Industrial Duty |
|---|---|---|---|---|
| pH5806 Series | Pre-pressurized Gel / Dual Annular PTFE | 0 to 130 °C / Up to 6 Bar | High-temp FEP shielded low-noise | Steam sterilization, bioreactors, chemical crystallization |
| IOT-485-pH Series | Polymer Solid Gel / Double Ceramic/Porous Pellicle | -10 to 80 °C / Up to 4 Bar | Polyurethane (PUR) IP68 submersible jacket | Municipal wastewater, river telemetry, smart IoT grids |
| pHG-2081 Immersion | Ag/AgCl Double Salt Bridge with KCL Reservoir | -10 to 100 °C / Up to 10 Bar | Chlorinated Polyethylene (CPE) industrial jacket | Flue gas desulfurization (FGD), electroplating effluent |
| DCA130 Integrated | Dual pH + Inductive Conductivity Coupling | 0 to 65 °C / Up to 3 Bar | Dual-sheathed marine-grade PVC | Hydroponics, recirculating aquaculture (RAS), RO monitoring |
| PureWater Trace pH | Flow-through Liquid Junction (Controlled Leakage) | 0 to 60 °C / Atmospheric to 0.5 Bar | Braided steel shielded coaxial | Semiconductor UPW, thermal power plant boiler condensate |
Localized Compliance, Export Protocols & Turnkey Integration
Seamlessly bridging Chinese manufacturing scale with strict international regulatory directives.
Global Certification Matrix
Every submersible probe conforms strictly to EU CE standards (EN 61326-1 for industrial EMC immunity and EN 61010-1 electrical safety), RoHS 2.0 hazardous substance limitations, and FDA food-contact material declarations for bioprocess assemblies.
Turnkey OEM/ODM Engineering
We supply private-label assemblies, customized submarine cable lengths up to 100 meters, specialized threading (PG13.5, 3/4" NPT, G 1"), customized body polymers (PVDF, PPS, 316L Stainless Steel, Titanium), and proprietary firmware branding.
Rapid Logistics & Engineering Support
Backed by bonded warehousing in Pudong and air freight dispatch channels, standard replacement probes ship within 48 to 72 hours. Our multi-lingual field engineers provide online diagnostic support across European, Asian, and Americas time zones.
Advanced Production & Testing Facility Walkthrough
100% in-house quality inspection, glass membrane forming, and 48-hour environmental burn-in.
Electrochemical Technology Roadmap: The Next Frontier
Investing continuously in solid-state sensors, optical pH interrogation, and predictive health analytics.
Next-Gen Polymer Gels
Development of hyper-branched quaternary ammonium polymerized electrolytes, eliminating junction dry-out even during intermittent wet-dry operational cycling.
Solid-State ISFET Probes
Ion-Sensitive Field-Effect Transistor technology eliminating glass membranes entirely. Designed for food processing and pharma lines where zero glass breakage is mandatory.
Predictive Membrane Diagnostics
Smart edge algorithms that continuously measure dynamic glass impedance, providing true remaining useful life (RUL) warnings before measurement failure occurs.
Energy-Harvesting IoT Probes
Integration of micro-current electrochemical potential harvesters with LoRaWAN and NB-IoT protocols for completely battery-free autonomous catchment telemetry.
Technical FAQ: Insights for Instrument Engineers
Comprehensive electrochemical answers addressing installation, calibration frequency, and drift prevention.
How do submersible pH probes prevent internal water ingress at significant depths?
Our submersible models feature IP68 triple-sealed cable glands with secondary epoxy encapsulation. The cable entry undergoes hydrostatic testing equivalent to 100 meters of water head. The cable uses water-blocking inner strands to prevent capillary wick-action if the outer jacket is scored.
What is the maximum immersion cable distance before signal degradation occurs?
For standard analog high-impedance mV outputs, cable runs should not exceed 10 to 15 meters to prevent parasitic capacitance and electro-magnetic pickup. For long-distance submersible installations (up to 1,000 meters), our digital IOT-485-pH sensors convert the analog signal to RS485 Modbus-RTU directly inside the probe head.
How frequently must a submersible sensor be calibrated in wastewater duties?
Thanks to our dual PTFE annular junction and pre-pressurized solid polymer electrolyte, typical calibration intervals are extended to 4 to 8 weeks in municipal aeration tanks, compared to 1 to 2 weeks for conventional liquid-KCl sensors. In heavily fouled oily streams, optional compressed-air self-cleaning jackets further extend service intervals.
Can your submersible pH sensors handle hydrofluoric acid (HF) or strong caustic?
Standard glass membranes dissolve rapidly in solutions with fluoride ions below pH 5 due to the formation of HF. For HF applications, we offer customized Antimony metal electrodes or specialized HF-resistant glass formulas. For strong caustics (pH > 12 at elevated temperatures), we utilize low-alkali-error glass membranes.
What mounting brackets are recommended for deep aeration or open canal basins?
We supply 1.0 to 3.0 meter submersible immersion mounting assemblies constructed of UPVC, PP, or 316L stainless steel. These include anti-sway cable holders, immersion protective hoods to prevent heavy ragging damage, and optional pneumatic auto-clean nozzles connected to pressurized shop air.
Are custom OEM pinouts, cable markings, and protocol conversions supported?
Yes. BOQU operates an internal electronics hardware division. We provide customized cable legends, custom M12 or VP connectors, proprietary RS485 Modbus register mapping to match existing legacy controllers, and full private-label housing silkscreening for instrument OEMs.
Complete Plant Monitoring Lineup & Online Analyzers
Integrate our submersible sensors with online transmitters, multi-parameter panels, and trace-level analyzers.
DCA130 Dual Channel pH & Conductivity Analyzer
View Specifications
MPG-6099Plus Multi-parameter Water Monitoring Panel
View Specifications
pHG-2081Pro Industrial Online pH/ORP Transmitter
View Specifications
SJG-2083CS Acid & Caustic Concentration Meter
View Specifications
Online Constant-Voltage Residual Chlorine Analyzer
View Specifications
Trace Silicate, Phosphate, Sodium & Hydrazine Analyzer
View Specifications
TOC-3042 Total Organic Carbon Online Analyzer
View Specifications
Online COD, Total P, Total N & Ammonia Wet Chemistry Analyzer
View SpecificationsAccelerate Your Water Quality Infrastructure Today
Work directly with China’s premier submersible pH probe manufacturer. Request custom CAD drawings, factory-direct wholesale pricing, or trial units for testing.